corsair hydro series h80i v2 install on am3 socket

CORSAIR HYDRO SERIES H80I V2 INSTALL ON AM3 SOCKET INSTALL
CORSAIR HYDRO SERIES H80I V2 INSTALL ON AM3 SOCKET MANUAL
CORSAIR HYDRO SERIES H80I V2 INSTALL ON AM3 SOCKET SERIES

Improved coldplate and pump design: our latest generation is better than ever at rapidly drawing heat away from your CPU.ĭual SP120L PWM fans: customizable performance and custom-molded blades for high static pressure with low turbulence.įlexible installation: use one of the included fans to save space, or use both for extra cooling power Modular, tool-free mounting bracket: installation is simple and straightforward.īuilt-in Corsair Link: adjust fan speed, monitor CPU and coolant temperature, and customize LED lighting directly from your desktop.

CORSAIR HYDRO SERIES H80I V2 INSTALL ON AM3 SOCKET SERIES

From there, proceed with your typical Hydro Series cooler installation (don't forget to plug in your power and USB cables).Intel LGA 1150 / 1155 / 1156 / 1366 / 2011 / 2011-3Įxtra-thick 120mm radiator: a depth of 49mm provides more surface area for rapid cooling.Replace the stock Intel bracket on your Hydro Series cooler with the AMD bracket provided in the kit.Insert the AM4 standoffs into the original AMD back plate, collared side down.Remove the stock AMD mounting clips from the front of your motherboard.Here is what’s included in the AM4 AMD Retention Bracket Kit:ĪMD AM4 Mounting Kit installation instructions: Older models are not compatible out-of-the-box, but you can use the following coolers with the AM4 socket if you also have the AM4 AMD Retention Bracket Kit: You can also check out our video on installing coolers: You do not need to use the AM4 AMD Retention Bracket Kit if you have one. In addition, you can customize cooling performance.

CORSAIR HYDRO SERIES H80I V2 INSTALL ON AM3 SOCKET INSTALL

use just one fan to save space, or install both in a push-pull configuration for extra cooling efficiency.

The Corsair Hydro Series H80i v2 is a high performance.

CORSAIR HYDRO SERIES H80I V2 INSTALL ON AM3 SOCKET MANUAL

If you cannot find your product manual, you can use this manual for the H100i Platinum. Most new Corsair liquid coolers are compatible with AMDs AM4 socket out-of-the-box. Socket compatibility for CPC 2011/AM3 - Fan details: (2345 RPM, 1 fan) - Air Flow: 70.69 CFM - Max Noise levels. If you want to see diagrams or more detailed installation instructions, consult your cooler product manual. Doing so will damage the retention hooks.

Tighten the thumbscrews until the cooler is secure.

Align your bracket with the stock AMD mounting clips and install the cooler by slipping the screw clip loops over the retention hooks.

You need to have enough slack to get the screw clip loops over the retention hooks of the mounting clip.

Do NOT tighten the thumbscrews all the way.

Install the AMD screw clips into the bracket and secure them with the thumbscrews.

Make sure the bracket is evenly secured on all sides before installing your cooler.

Install the AMD bracket by pushing both sides into the slot on the pump.

Remove the pre-installed Intel mounting bracket from the cooler.

To mount your cooler using the AM4 socket: Both of the brackets attach to the cooling unit magnetically, so just slide the. The H100i ships with two different mounting brackets one for Intel sockets, and one for AMD.

To install your cooler in an AM4 system, you will need the following hardware: In this installation we will be attaching the H100i to an Asus P9X79 motherboard which uses the LGA 2011 socket. You do not need to use the AM4 AMD Retention Bracket Kit if you have one of the following coolers: Most new Corsair liquid coolers are compatible with AMD’s AM4 socket out-of-the-box.

Corsair hydro series h80i v2 install on am3 socket